Motor protection circuit breaker MS32
Motor protection circuit breaker MS32
Description
MS32 | Motor Protection Circuit Breaker
- Manual control: START, STOP, push-buttons - with a trip indication (i.e. push-buttons stay in the middle position)
- Automatic switch-off at over-current with a thermal or magnetic release
- Control with under-voltage release or shunt release
- An auxiliary switch for side mounting or flush mounting used for indication of the switching state
- indication of release with trip indicating auxiliary switch
- On/OFF buttons positions unequivocally indicates switching position of main contacts
- Contact material: resistant to contact welding, enables low contact heating
- Isolating distance between contacts: 4,5 mm per contact place
- Connection of a rigid or flexible conductor
- Assembly to 35 mm wide mounting rail in compliance with EN 60715
- The vertical or horizontal operational position
- Setting range:
- 1 - 1,6 A
- 1,6 - 2,5 A
- 2,5 - 4 A
- 4 - 6,3 A
- 6,3 - 10 A
- 13 - 18 A
- High short-circuit and tripping capacity of Icu at 400V: 100kA
- Function: TEST
- Number of poles: 3
- Rated insulation voltage: 690V
- Mechanical and electrical resistance (op. C.): 100000