RFDEL-71M /230V

Universal dimmer - MULTI function

6 lighting functions + ON/OFF functions Sources: R, L, C, dimmable LED, ESL. Output: 600W. External control via aux inputs by: analog signal 0(1)-10V, potentiometer or wired button.

More

3D MODEL
Manufacturer: ELKO EP

Ord. code: 4897 standard
EAN: 8595188148979

Availability: More than 10 pcs
Selling price 168,90 € incl. VAT -30%
Price excl. VAT 97,69 €
Your price: 118,20 € incl. VAT
pcs

Description

 RFDEL-71M | Universal dimmer

  • The universal modular dimmer is used to regulate light sources:
    • R – classic lamps
    • L – halogen lamps with wound transformer
    • C – halogen lamps with electronic transformer
    • ESL – dimmable energy-efficient fluorescent lamps
    • LED – LED light sources (230V).
  • Control can be performed by: a) Detectors, Controllers and System units iNELS RF Control b) by control signal 0(1)-10V c) potentiometer d) existing button in the installation.
  • The unit‘s three-module design with switchboard mounting enables the connection of a dimmed load of up to 600W.
  • 6 light functions - smooth increase or decrease with time setting 2s-30 min.
  • When switched off, the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
  • Thanks for setting the min. brightness by a potentiometer, you will eliminate the flashing of the LED and ESL light sources.
  • The universal dimmer may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
  • The programming button on the controller is also used for manual control of the output.
  • The package includes an internal antenna AN-I, in case of locating the unit in a metal switchboard, you can use the external antenna AN-E for better signal reception.
  • Memory status can be pre-set in the event of a power failure.
  • For components, it is possible to set the repeater function via the RFAF / USB service device.
  • Range up to 160m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
  • Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2 ).

Technical parameters

  • Supply voltage: 230V AC / 50Hz
  • Dimmed load: R,L,C, LED, ESL
  • RF command from the transmitter: 866MHz, 868MHz, 916MHz
  • Range in open space: up to 160m
  • Analog control: potentiometer or 0 (1) -10V
  • Mounting: DIN rail EN 60715
  • Protection: IP 20 under normal conditions
  • Dimensions: 90 x 52 x 65mm
  • Weight: 125g

 

Documents

Parameters

External buttons YES
Power voltage 230 V AC
Design 3-MODULES
Output R, L, C, ESL, LED