RFDW-71 | Glass touch controller with dimmer

• The glass design controller with dimmer and touch buttons is used to control light sources:
  • R – classic lamps (resistive load)
  • L – halogen lamps with wound transformer (inductive load)
  • C – halogen lamps with electronic transformer (capacity load)
  • ESL – dimmable energy-efficient fluorescent lamps
  • LED – LED light sources (230 V) equipped with LED.
• The touch buttons on the circuit breaker allow you to directly control the integrated dimmer as well as other components of the installation.
• The backlight intensity (white LED) of the buttons is automatically adjusted depending on the ambient lighting.
• They can be combined with detectors, controllers, iNELS Wireless, or system components for output control from other locations.
• 7 light functions – smooth increase or decrease with time setting 2 s – 30 min.
• When switched off, the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
• Thanks for setting the min. the brightness you will eliminate flashing of the LED and ESL light sources.
• The universal dimmer may be controlled by up to 25 channels.
• Possibility to set the memory status in case of power failure.
• Range up to 160 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20N or protocol component RFIO2 that supports this feature.
• Communication frequency with bidirectional protocol RFIO2.

 Technical parameters

• Number of channels: 4
• Power supply: AC 230 V
• Design: glass sharp
• Color: W - white, B - black
• Dimensions: 94 x 94 x 41mm
• Protocol: RFIO2