RFSC-61 | Switched multifunction socket

• The switched socket is used to control fans, lamps, direct heaters, and appliances, which are connected by a power cord with a plug up to 16A.
• They can be combined with detectors, controllers, or iNELS RF Control system elements.
• Multi-function design – button, impulse relay, and time function of delayed ON or OFF with a time setting of 2s-60 min.
• The switched socket may be controlled by up to 32 channels
• The programming button on the socket is also used for manual control of the output.
• Possibility to set the memory status in case of power failure.
• Range up to 200m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol
• Communication with bidirectional RFIO protocol.
• Thanks to the socket design, installation is simple by plugging it directly into an existing socket.