The flood detector is used to detect water leakage - the activation occurs the moment the flooding of the contacts located on the underside of the detector occurs.
Upon detecting water, the flood detector immediately sends a signal to the switched unit, which further switches on a pump, GSM gate or closes a pipe valve.
It brings a quick solution to learn about unwanted flooding in your bathroom or kitchen, to which you can immediately respond with a paired actuator. Which can close, for example, the water supply to a flowing washing machine.
Flood detection is signaled by vibration, optical and acoustic signaling.
Low battery signaling 5 times by flashing the LED every 15 minutes or a warning in the iHC application.
Range up to 160 m (in open space); if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
Technical parameters
Supply voltage: 2x 1.5 V AAA batteries
Alarm detection: optical and audible alarm
Frequency: 866 - 922 MHz
Signal transmission method: unidirectionally addressed message
Range in free space: up to 160m
Operating position: capture contacts for flooding downwards
