It guards areas (e.g. bathrooms, cellars, shafts or tanks) before flooding.
Flood detector, after detecting water, immediately sends a command to the switching element, which further switches the pump, GSM gate or closes the pipeline valve
Possibility of connecting an external probe FP-1 (not included in the delivery) - max. Cable length up to 30 m.
The programming button on the detector is used to:
function setting with switching element
battery status detection
determining the signal quality between the element and the detector.
Battery power supply (1.5V / CR2477 - included in the package) with a lifespan of approx. 1 year depending on the frequency of use.
Thanks to the battery supply, the location of the detector is arbitrary.
Range up to 160m (outdoors), in case of the insufficient signal between the controller and the element, use the RFRP-20 signal repeater.
Communication frequency 868 MHz with bidirectional iNELS RF Control protocol.
Probe FP-1
the flood sensor is designed to detect flooding, especially in residential areas, overflowing baths, disorders of washing machines, dishwashers, boilers, etc.
using with a wireless detector RFSF-1B or with level HRH-x switch
fitted with double-sided adhesive tape on less porous surfaces (tile) or screwing
the probe detects flooding during flooding electrode, then the signal is sent to one of the processing units
