RFTC-10/G | System temperature controller

SEMI PRODUCT = electronics + cover

• RFTC-10/G is used for temperature measurement (in the range of 0 to 55°C) and correction of the preset temperature in RF Touch or eLAN-RF system devices in the range of ± 5°C. The temperature correction is valid until the next program change in the given system device.
• The backlit LCD display shows the current and set temperature, ON / OFF status, battery status.
• Range up to 100m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
• Communication frequency with bidirectional protocol iNELS RF Control.
• Color combination of heating unit in the design of frames LOGUS90 (plastic, glass, wood, metal, stone).

Technical parameters

• Supply voltage: 2 x 1.5V AAA battery
• Display: LCD, characters / see Display description
• Backlight: active 10s after pressing
• Transmission indication / function: symbols
• Transmitter frequency: 866MHz, 868MHz, 916MHz
• Minimum control distance: 20mm
• Working position: on the wall
• Fastening: by gluing/screwing
• Protection: IP30
• Weight: 66g (without batteries)