simple thermostat for monitoring and regulating the temperature
Single thermostat for temperature monitoring and regulation in the range -30°C to +70°C (-22°F to 158°F) in six ranges.
It can be used for monitoring temperature e.g. in switchboards, heating systems, cooling systems, liquids, radiators, motors, devices, open spaces, etc.
The function of short-circuit or sensor disconnection monitoring.
Possibility to set function “heating”/”cooling” (setting is done by DIP switch).
Adjustable hysteresis (sensitivity), switching by a potentiometer in range 0.5 to 5°C / 0.9 to 9°F
Choice of external temperature sensors with double insulation in standard lengths 3, 6 and 12m (9.8´,19.7´ and 39.4´).
It is possible to place the sensor directly on the terminal block - for temperature monitoring in a switchboard or in its surroundings.
Multivoltage supply AC/DC 24 -240V, not galvanically separated.
Output contact 1x NO - SPST 16A /250V AC1.
Red LED indicates the status of output, a green LED indicates the energization of the device.
1-MODULE, DIN rail mounting
More information
Function: single level
Supply terminals: A1-A2
Voltage range: AC/DC 24 - 240V (galvanically unseparated) (AC 50-60Hz)
Burden: 2VA
Operating range: - 15%; + 10%
Temperature range: 0.. +40°C
Number of contacts: 1x switch (AgSnO2)
Operating position: any
Mounting: DIN rail EN 60715
Protection degree: IP40 from front panel / IP10 terminals
