WIRELESS DIMMING SOCKET - classic

Combination of iNELS wall-mounted wireless controller and wireless dimming socket for regulation of all types of dimmable bulbs and light sources.

PACKAGE:

RFWB-40/G | On-wall button controller 4 buttons

• The wireless controller is used to control switches and dimmers (lights, gate, garage door, blinds, etc.).
• RFWB-40/G: four buttons enable control of four units independently.
• The flat design with a level base makes it ideal for fast installation on any surface (fixation with adhesive or screws in the installation box).

RFDSC-71N | Dimming socket plug

• Used to control light sources that are connected by power cord - especially lamps: R, L, C, ESL, LED - LED light sources (230V).
• Be combined with detectors, controllers, iNELS RF Control, or system components.
• Installation is simple by direct insertion into the existing socket.
• Output load 300W.
• Multi-function 6 light functions - smooth increase or decrease with time setting 2 s-30 min.
• When switched off, the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
• The universal dimmer may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
• The programming button on the socket is also used for manual control of the output. 
• Memory status can be pre-set in the event of a power failure.
• Range up to 160 m (in open space), if the signal is insufficient between the controller and unit.
• Use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.