Combination of iNELS wall-mounted wireless controller and switching device for universal use. It can be used to control electrical appliances, lights, sockets, garage doors, etc.
PACKAGE:
RFGB-240/B | Glass touch controller, 4 buttons
The wireless control - is used to control, lights, gates, garage doors, shutters, etc.
The thickness is only 8 mm.
4 capacitive buttons allow you to control 4 components.
Fast installation on any surface - the rear base allows screwing to the walls, gluing with double-sided tape, or just laying on the table
RFSAI-11B-SL | Switch unit, 1-channel
The switching unit with 1 output channel is used to control appliances, lights, etc.
Easy to integrate it to control garage doors or gates.
They can be combined with detectors, controllers, iNELS RF Control, or system components.
The BOX design lets you mount it right in an installation box, a ceiling, or a controlled appliance cover.
The switched load up to 8A (2.000 W).
Single-function design - switch on/off.
The output on the switching unit can be controlled by up to 25 channels (1 channel represents one button on the controller).
The programming button on the unit is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
For components labeled as iNELS RF Control2 (RFIO2), it is possible to set the repeater function via the RFAF/USB service device.
Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2).
