Combination of iNELS wall-mounted wireless controller and switch socket.
PACKAGE:
RFWB-20/G | On-wall button controller 2 buttons
The wireless controller is used to control switches and dimmers (lights, gate, garage door, blinds, etc.).
RFWB-20/G: two buttons enable the control of one or two units independently (depending on the type of switching element).
The flat design with a level base makes it ideal for fast installation on any surface (fixation with adhesive or screws in the installation box).
RFSC-61N | Switching socket-plug
The switched socket with 1 output channel is used to control fans, lamps, heaters, and appliances, which are connected by a power cord.
They can be combined with detectors, controllers, iNELS RF Control system components.
Thanks to the socket design, installation is simple by direct insertion into the existing socket.
It enables the connection of the switched load up to 16A (4.000 W).
Multi-function design - button, impulse relay, and time function of delayed ON or OFF with time setting of 2 s - 60 min.
The switched socket may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
The programming button on the socket is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2).
